With Dispenser & Cutter~
A coated Mylar film for the most precise analysis of occlusal relationships that is 8 microns thick,and is coated with special hydrophilic waxes that mark clearly on wet or dry occlusal surfaces.
Made in Germany.
Arti-Fol 8µ22mm | 2-sided |red BK 25
Even
the smallest high spots measuring just a few microns can cause
dysfunctions (very often TMD) in the patient and may even obstruct
swallowing. The test material is subject to stringent requirements
because of the occlusal proportions. The occlusal contacts often have a
very small diameter which is scarcely discernible on highly polished
ceramic or metal surfaces. The test material should be extremely thin to
ensure and delineate the exact contour of the actual occlusal contacts.
Bausch Occlusion test films meet all these requirements and are
characterized by color-intense marking especially on occlusal surfaces
which are hard to test. The color coating, which is only 6 µ thick,
consists of wax and pigment. It also has hydrophilic components to
improve the color transfer even on moist occlusal surfaces.
Bausch Arti-Fol® Occlusion films are especially suitable for
representing static and dynamic occlusion in several colors. The first
step is to inspect the static occlusion in red and the second step to
inspect the dynamic occlusion in black. The color sequence can always be
alternated. Several different colors can be used for a much more
precise representation of dynamic occlusion. Bausch Arti-Fol® is
available in four different colors. All films are available with
double-sided color coating for the marking of antagonistic contacts.
*Prices are subject to change without notice
